Reflective Sleeve for Traffic Cone

Model NO.: RS7200 Application: Road Construction Surface: PVC, Acrylic Cofficient of Retroflection: R′>380 Processing: Screen Printing Products: Reflective Material Trademark: TID HS Code: 5903109090 Material: Reflective Cone Color: Red/White, Yellow/Black, Green, Pink OEM: Allowed Usage: for Tuck, Car Safety Feature: High Reflective Intensity, Self-Adhesive Type: Traffic Cone Origin: Shishi, Fujian 1. Products: Reflective Sleeve
2. Material: Red/white, yellow/black, green, pink, blue
3. Feature: High Intensity, water proof, cold-resistant
4. Size: 2.5cm/0.98", 3.5cm/1.37", /5cm/2"
5. Color: Red/white, yellow/black, green, pink, blue
6. Application: For safety


reflective cone collar, reflective cone sleeves
3M reflective cone collar for 3650 series traffic safety cone
Excellent wide angle reflectivity for full width appearance
Full-contact pressure sensitive adhesive for durability
Uses Traffic Cones for work zones, utility, and emergency vehicles
Sheeting is made specifically for the shape and chemistry of PVC traffic cones
 
 
Our Reflective Traffic Cone Collars / Sleeves insure that your traffic cones will be seen at night. Sold in packs of 25 collars. We carry the wrap around collars that are applied by peeling the backing off the material and wrapping it around the cone. The collars are curved so that when they are applied they create a level band around the cone. These are DOT APPROVED collars and exceed all reflectivity requirements. They meet ASTM D-4956 Type III standards. They are cut from Type III Hi Intensity Sheeting. The sheeting is reboundable meaning that it is flexible and will rebound when hit by a vehicle. Collars are available for 18", 28" standard, 28" Slim and 36" standard traffic cones. We carry the 4" and 6" collars. Most states require a 6" reflective collar and a 4" collar on each cone.

All cones vary so there may be slight differences in sizes but as long as your cone is close to the standard sizes the specified collar should work fine. 
To install the collars you can wrap them around the cone with the backing still on until the ends are lined up.  Then hold the collar in place and take a piece of masking tape and tape one end of the collar to the cone thus creating a hinge.  Next you would simply peel the backing off starting at the hinge and work your way around.  The two ends should meet perfectly.
 
 

Name	Reflective Safety road warning Traffic Cone Sleeves
reflective performance	High retro-reflective performance
material	Environmental protecting safe pvc
semi-finished product	pvc micro prismatic type
Sleeve quality	EN12899, ASTMD4956,or customized for your own quality
Cold-resistant degree	25°C -40°C
Available color	White,Red,yellow,customized
OEM&ODM	Print the logo&letters use the suitable paint to screen-print various patterns as your need
Sleeve height	10-64cm
Apllication	joint on the plastic cones
Reflective coefficient	200-400
material	Environmental protecting pvc
semi-finished product	pvc micro prismatic type

Contact us if you need more details on Reflective Sleeve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Reflective Collar、Reflective Cone Sleeve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : High Intensity Prismatic Reflective Sheeting